3 Sep
2008
3 Sep
'08
11:30 p.m.
con un ifconfig... (no tengo ip será por q estoy usando eth0? (el cable)
wlan0_rename Link encap:Ethernet HWaddr 00:1b:77:ed:3b:6f
inet6 addr: fe80::21b:77ff:feed:3b6f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:8090 (7.9 KiB) TX bytes:3296 (3.2 KiB)
debian:/home/rafa# iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
eth2 no wireless extensions.
wlan0_rename IEEE 802.11 ESSID:"nat_net"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1C:10:0B:52:29
Bit Rate=54 Mb/s Tx-Power=15 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:AEAE-1212-AE
Link Quality=97/100 Signal level=-28 dBm Noise level=-127 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
debian:/home/rafa#
en las reglas de persistencia hay algo curioso:
debian:/etc/udev/rules.d# vi 70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, probably run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.
# MAC addresses must be written in lowercase.
# Firewire device 08004603027dc1a6 (ohci1394)
SUBSYSTEM=="net", DRIVERS=="?*",
ATTRS{address}=="08:00:46:03:02:7d:c1:a6", NAME="eth0"
# PCI device 0x11ab:0x4351 (sky2)
SUBSYSTEM=="net", DRIVERS=="?*",
ATTRS{address}=="00:1a:80:20:fc:07",
NAME="eth1"
# PCI device 0x8086:0x4222 (ipw3945)
SUBSYSTEM=="net", DRIVERS=="?*",
ATTRS{address}=="00:1b:77:ed:3b:6f",
NAME="eth2"
si te dijas pone "ETH2" y el "device" es ipw3945... ¿por qué entonces
es wlan0 en mi pc?
me estoy liando...
gracias !
2008/9/3 Jorge R. <jrrperi(a)gmail.com>om>:
El 3 de septiembre de 2008 22:45, Rafa Toucedo <rtoucedo(a)gmail.com>
escribió:
--
Rafael Toucedo.
Jorge R. escribió:
Lo del nombre de wlan0_rename es cosa de udev , prueba a bajar , subir la
interfaz y asociarte (ifconfig wlan0_rename down && iwconfig wlan0_rename
mode managed && ifconfig wlan0_rename up && iwconfig wlan0_rename essid
<tuessid> key <tukey> ) ( Para cambiar el modo de la interfaz tienes que
bajarla antes )
Para lo de udev , tendras que buscar en /etc/udev/rules.d/ y editar el
fichero de las reglas de persistencia.
Espero que te sirva de ayuda. Un saludo
_______________________________________________
GALPon mailing list
GALPon(a)listas.galpon.org
https://listas.galpon.org/cgi-bin/mailman/listinfo/galpon
¿Aparece algún interfaz al hacer iwconfig ?
debian:/home/rafa# iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
eth2 no wireless extensions.
wlan0_rename IEEE 802.11 ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0